Mark 1 Suburban Coaches Update - Production Complete
Fran Burke
Modellers awaiting our very new and very detailed Mark 1 56ft 11' coaches have been awaiting some news on these wonderful coaches. After some trials and tribulations, including something completely new which popped up to throw yet another curveball our way, we can confirm that production is complete on our BR blue and our Yellow Accurascale Exclusives tool van.
Shall we take a closer look first?
As you can see, they look pretty delicious! The further good news is that production is complete for these coaches and they're already on the way to us! They are due to land at our warehouse in the last week of August.
So, that's the blue and the tool van. But, what about the carmine?
Well, this is where it gets interesting.
When we sign off for production of a new model, everything is correct; the details, the printing and of course, the colour. These act as a template for the factory to follow.
Once production is completed, the factory sends us one of every model from the production run to check and sign off on. The Mark 1 coaches were no different.
Sadly, the factory used an incorrect shade of carmine which did not match what we signed off on with the decorated sample. This means the whole carmine production batch was wrong.
There was only one thing to do; remanufacture the coaches in the correct colour. Our factory partner, brilliant as always, rose to the challenge of this and stood over their error. They wanted it to be right as much as we did and have now fixed the issue for us.
However, this does take time, and therefore the carmine coaches have been delayed slightly as a result. We are very sorry for this delay, but it was beyond our control.
The good news is that the factory are almost finished the new carmine batch, and we will have a new delivery date for these in approx. 2 weeks time. We do know that they will be approx 4-6 weeks behind the blue and tool van coaches, but we will have a more specific date soon which we will send out to you as soon as we can.
Our Maroon production run is still on course to be delivered Q1 2025 as per the original announcement.
In the meantime, make sure you order these very special coaches below, or via your local stockist! As you can see above, you will be getting something rather special for your money!
When we launched our Powering Britain range, the aim was simple: tell the story of Britain's rail freight revolution through the iconic wagons that powered the nation. From merry-go-round hoppers to the birth of the railways, every wagon has played its part.
Today we're delighted to reveal the next chapter in that story with the announcement of one of the most requested British freight wagons of recent years...
The BR 32.5t HBA/HEA Domestic Coal Hopper!
For over three decades these rugged wagons were a familiar sight across every corner of the British Rail network. Whether working lengthy domestic coal block trains, Speedlink services or mixed freight formations, the HEA became the standard wagon for Britain's domestic coal traffic.
Yet despite a fleet approaching 2,000 wagons and a career stretching from the mid-1970s right through to the 2010s, the HEA has never truly received the high-fidelity ready-to-run treatment it deserves in OO gauge.
Until now.
A New Standard for Domestic Coal
By the mid-1970s British Rail recognised the need to replace its ageing fleet of unfitted mineral wagons inherited from the steam era.
While the HAA merry-go-round hopper had transformed power station coal traffic, it wasn't suited to the wider domestic coal network. Its automatic discharge equipment made it expensive to build and maintain, and many coal merchants simply didn't require such sophistication.
Instead, BR developed a simpler, more versatile design.
The prototype HBA, numbered 360000, emerged from Shildon Works in 1975. Its all-steel construction, manually operated hopper doors and air-braked running gear proved an immediate success, leading to the construction of 1,998 production wagons between 1976 and 1979.
Initially finished in traditional BR Bauxite, many later received the striking Railfreight red and grey livery introduced in 1979, although weathered bauxite examples remained a common sight for decades afterwards.
A Wagon That Evolved
Like many successful BR wagon designs, the HEA continually evolved throughout its career.
The earliest wagons featured centrally-mounted end ladders, leaf spring suspension and twin air pipes. As production continued, offset ladders became standard while improved Bruninghaus suspension increased the maximum speed from 45mph to 60mph, prompting the TOPS recoding from HBA to HEA.
Safety modifications saw ladders disappear altogether during the EWS era, while underframe details evolved with changing braking and suspension equipment.
These subtle - but highly visible - differences are exactly the sort of variations we love reproducing at Accurascale.
More Than Just Coal
As domestic coal traffic declined during the 1980s, the versatile HEA chassis found new life in an astonishing variety of roles.
Some carried rock salt. Others found second careers within collieries.
Hundreds became the familiar MEA box wagons, while others evolved into the MFA ballast spoil wagons that survived until as recently as 2024.
Covered CEA wagons carried everything from china clay to lime and even seaweed.
Perhaps most distinctive of all were the cut-down RNA nuclear flask barrier wagons, created from redundant HEAs for use on Sellafield traffic - a fascinating chapter in the wagon's long working life.
The humble HEA proved remarkably adaptable, becoming one of the most influential freight wagon chassis designs of the late BR era.
A Missing Link Finally Arrives
Our HEA family represents one of the biggest upgrades in the modern RTR wagon scene.
The new tooling finally fills that gap by faithfully recreating these workhorses with the attention to detail that you expect from us.
Better still, we've gone far beyond a single version.
For the first time in ready-to-run OO gauge we're producing:
As-built HBA wagons with leaf spring suspension
Early central ladder variants
Offset ladder HEAs
Later no-ladder EWS-era examples
Multiple axlebox styles
Single and twin air pipe variations
Wagons with and without AVI transponders
Correct suspension variations throughout production
Every version has been researched to accurately represent the prototype during its intended era.
Specification Worthy of a Workhorse
As with every Accurascale freight wagon, we've focused on both appearance and operation.
Every model features:
Diecast metal chassis for excellent weight
Brass pinpoint bearings for exceptionally smooth running
Flexible NEM coupling pockets
Sprung metal buffers
Scale coupling pack included
Etched stainless steel brake discs
Finely reproduced underframe and brake equipment
Prototype-specific suspension, axleboxes and pipework
Era-correct tooling and decoration variations
Every livery has been carefully researched to match the prototype, and our colourful first run depicts the early years of the original BR Bauxite, striking Railfreight colours and later Trainload Distribution schemes.
Just the Beginning...
The HEA is much more than a single wagon.
It forms the foundation of an extensive family that served Britain's railways for almost fifty years.
With this entirely new tooling we've created a platform capable of reproducing many members of that remarkable family - and this is only the beginning.
Expect many more developments from this versatile chassis in the future.
Powering Britain Rolls On
From coal merchants and Speedlink trains to nuclear flask workings and engineering duties, the HEA family became one of the defining freight wagons of the late BR era.
Nearly 2,000 were built, yet today only eight survive.
We're proud to preserve their legacy in miniature with what we believe is the definitive OO gauge model of this classic British freight wagon.
The BR HEA joins our ever-growing Powering Britain collection, bringing another essential piece of Britain's freight railway story to life.
It's time to fill one of the biggest gaps in the modern freight fleet.
Pre-order your models today, exclusively from Accurascale.
Prices start at just £79.98 per triple-pack - and you'll get 10% Rake Builder discount when buying two packs or more. That works out from as little as £23.99 a wagon!
By making these available for sale directly, we're able to pass the savings straight back to you, the modeller, helping put more money back in your pocket, and allowing you to buy longer trains!
Pre-order yours with no deposit down, and a projected release date of Q2 2027.
PRE-ORDER YOUR MODELS TODAY
In the beginning, we created the coaches for your pre-grouping locos.
Now they're on their way...
Check out the factory finished production samples of our Genesis coaches!
