D9007 Pinza

Its hard to fault the AS Deltic in concept – AS set out to make the ultimate ‘mass market’ RTR model of this iconic prototype combining prototype fidelity, use of cutting edge modelling techniques and electronics all at an affordable price. They have without question achieved this and this is my third example (bought from the last stock being held back by AS for warranty replacements).

My first two examples did suffer from what appeared to be the common problems of parts being shaken loose in transit. This example was noticeably better packed than my last model direct from AS (the other came from Rails who packed theirs MUCH better than the first AS deliveries) and I was pleased to discover it was entirely complete on delivery - (even those bogie chains!)

Haven’t had chance to run this example yet but fully expect it will have the same smooth, powerful and silent (until the sound is turned on!) mechanism of the other 2.

Superb models at affordable prices – long live Accurascale! 😊

Some loose parts in the package

This is the second of the Accurascale Deltics I've been lucky enough to purchase, and like D9004 she's in the full two tone green livery that suits these locos so well. Like my first Deltic this one has also suffered from a few loose small detailing parts and 1 brake chain having come adrift. On further investigation I found that 1 corner step under the buffer was missing altogether, however a quick email to and from Accurascale support has assured me that many of these small detailing parts are already on order from the factory and one of them now has my name on it and will be despatched once they've arrived and been processed.
As I said in my previous review these minor inconveniences in no way detract from the pleasure I get from both of these locos, and certainly wouldn't stop me from purchasing further Deltics or any other Accurascale products in the future, infact I hope there are plans for more Deltics in the future as I would love a few more.
Thankyou Accurascale for delivering such highly detailed quality locos at a price that puts the "big boys" to shame.
Keep up the good work....Alex

Exactly as expected and wanted, but had a little issue getting it out of the plastic packaging, or my indelicate fingers caused a breakage of on bogie chain mount, all safely back in box, waiting for a layout to run on

I join in applauding you for such a fine model. I wish you could produce a simple sheet with an explanation of some of the more arcane functions. Perhaps it's partly because I'm in America that some of the function descriptions don't mean a thing to me. Just a thought. Thanks for considering my idea.

Excellent model, runs amazingly smooth.
Packaging for international shipping is outstanding.
Model arrived in perfect condition!

Had small issue engine room lighting and customer service were most helpful,

Magnificent model, captures the presence of the prototype, very pleased with my acquisition, it must have a bumpy ride to Oz though as quite a few small parts have come off in transit. No complaints, however as I don't know how it could have been better packed. All bits are easily glued back on and at least I have the details to do that, unlike some more highly priced efforts from other manufacturers! (no names). Keep up this standard and you won't be long in business...........You will all be retired millionaires!!!!
Rgds......Mike

Rather than a specific review of D9007, I'm sharing my views on the Accurascale Deltics in general as I ordered 7 in total. Overall, I'm very pleased with the models- the attention to locomotive specific accuracy is first class, not just to rather obvious things (though the first time on a model of a Deltic) like the absence or inclusion of additional grills above the nameplates or correct bogies, but even down to nos. 19,20 & 21 having the remains of fixings for the roof mounted horns they carried when first delivered. The number of fine and separately fitted details is astonishing given that the price is very competitive compared to other manufacturers. This detail, however, can be a problem in that some can become easily dislodged in transit. All seven of my models had at least one part broken off and some had several. Nothing I haven't been able to fix myself with a good illuminated magnifier and a steady hand! Overall, I'd say that these models are amongst the best I have even bearing in mind the small amount of repairing necessary. Well done Accurascale and I look forward to my pre-ordered class 37s, 31s and Manors.

Awesome!

It’s a very good model and highly detailed, however as models become more detailed they also become more delicate. Two of the chains from the body to the bogies required attention, one was broken mid way along its length, the other one however was detached at the body end and I think as it is actually larger than the hole could never have been attached at the factory. Once the chains were sorted however they seem a tad too long as they get caught up inside the bogie when going through any radius of point work. There were a few added details loose in the packaging but after such a long journey even the robust packaging used can not always protect the vagaries of such a journey. Glad I bought one though as all issues were minor and easily resolved.
Keep up the good work.

I love my Pinza model. It’s captured the shape perfectly, the level of detail is superb and the packaging is the best I’ve seen in 00 gauge. The booklet and spare head code panels are a nice touch. The sound project is great (except as below) and really captures the ‘drone’ of the prototype.

I had two issues with mine:
One of the bogies chains was loose and needed gluing back on; and
More significantly, the speaker rattles occasionally creating a horrible tinny sound particularly when coasting to a stop. It only happens occasionally and I seem to have cured it by punching the speaker down in its housing, but I’m nervous about it re-occurring.

Overall I’m very happy, but more testing for the next loco would be in order.

My first impression was what a super model. The packaging was first class.
After taking out the loco and putting on the programming track it was easy to program the loco for DCC running in.
It was at this point I noticed that 1 of the bogie chains was disconnected from the body.
I then ran the loco for about 30 minutes each way. I noticed a cyclic thumping on running.
I contacted Accurascale by email with a video showing this noise.
I very quickly had a reply asking to give the loco more running in.
I have now completed about 3hours of running in and still the noise has not changed.
I again contacted Accurascale again with a new video.
The response virtually by return gave permission to return my loco.
This has now been returned and I have received notification that the loco has been received.
The note above stated that resolution can take up to 28 days. So I wait to see.
After running the loco I found 2 guard irons had disconnected from the body and dropped on the track

Stuart Couzens

I was quite amazed, and pleased with the affinity to prototype of Acurascale's model. Incredible attention to detail right down to the smallest item. Even the 'handbrake' control chains are included.
Its performance is very impressive, not just speed, but haulage capacity. As per the norm, it needed running in as it was, like quite a few Chinese built locos a bit 'dry' as regards lubrication but, to be fair, sometimes light lube can dissipate on a 'cruise' especially if you're in a box with several other packages on a lengthy journey!!! However, with the very helpful and speedy advice from Accurascale I soon lubricated the relevant areas and right from then it became silky smooth, and still is. So, in short, a very accurate model that runs excellently - Thanks Accurascale.
Dave Watts

I always remember as a child going to Newcastle station to see the Deltics operating on the East Coast mainline to Kings Cross, and I remember Pinza, and some of the others and their fleeting visits and thinking what beasts they were and the image they projected of pure power. These models take me back to that childhood. The detailing, the presence portrayed superbly, and just a level of quality which does the class proud. Great job.

It’s impressive, although as models become more detailed they also become more delicate. The chains from the body to the bogies, great but I’ve one that doesn’t stay in and I’m going to do some delicate superglue work to fix. So I hope I never have to take the body off, just grateful I purchased one with sound.

A superb model for an unbelievably reasonable price. This is the standard that larger companies need to achieve. The only criticism I have is that the documentation was too scant with regard to meanings of CV settings - a lot more detail is needed.

Arrived as advised and what a superb locomotive. Excellent detail. Runs well.
Brake chain loose and a couple of detail bits in the box that had come off.

I have bought models of the Deltic in the past, but this has to be hands down the best Deltic model ever made.
It has the right look about it and is beautifully painted and finished.
I like the fact that Accurscale have offered such a wide range of models depicting the Deltic throughout its entire lifetime.
I am impressed that they have gone the extra mile and my model is correct for the early 1960s (no side louvre vents, etc).
Well done Accurascale!

What can I say, this is an incredible model of a loco I used to know in the 60’s when I raced down behind her on the ECML on business trips. So there is a personal link. Since retirement, I have collected from all the major manufacturers, but this one far excels the others. Too many positives to report, the weight, detail, accuracy (!), sound and performance still amaze me to this day. Others have reported the weak tension lock couplings, I have standardised on Kadee’s which solve the problem. Along with a few more, the initial starting is a little jerky, even after running in, but hopefully time will solve that one too. Congratulations all round ! I look forward to more offerings.
Mike Todd.
Ps Could the fans be made to operate ??

For quite a few years now I have been modelling in 7mm scale but when I saw this beauty I knew I would find it hard to resist. Memories play a big part in everyone's choices, and so it was with this – I spent many an hour at the lineside near Hadley Wood Tunnel in the 1960s and I have a vivid recollection of D9007 PINZA. You would hear it first – the powerful metallic roar that could mean only one thing – a DELTIC! Then, bursting from the tunnel into the sunlight came PINZA. Unforgettable.

So I ordered this 4mm scale model, not really knowing if I was making a silly mistake by reverting to the smaller scale. All I can say is that when it arrived I was absolutely blown away. The level of detail is astounding in a model of this size. The finish is superb and it has real weight and gravitas too.

Is it enough to make me go back to 4mm? Not quite, but it is a truly impressive model for display and I am certain I will acquire more from the Accurascale stable in due course. The verdict – OUTSTANDING.

Like many others on Utube mine came with 2 boggy chains broken off. But my main problem is that my trains all are controlled by Hornby elink Pro and I cant get it to run at correct speeds. I have tried to alter the CVs Can any body help

Excellent model. very pleased with the level of detail

THE MODEL IS ABSOLUTEY PERFECT IN DETAIL ENCAPSULATING WHAT OTHERS HAVE MISSED. THE QUALITY OF THE PAINT AND DETAIL FINISH IS FAR BETTER THAN I EXPECTED. IT IS A SMOOTH RUNNING WELL CONTROLLED MODEL WITH ABSOLUTELY SPOT ON SOUND.

Well worth the wait, it is a truly awesome model which fully captures the look and 'presence' of a real Deltic.

The model captures the bulk of a Deltic very well, enhanced by the exquisite fine detail, especially in the bogies and underframe area.

The sound representation is very effectively done, too, enhancing the whole experience.

All told, as near to perfection in OO scale as you could wish for.